About the ADR CRU Producer PRO HIGHSPEED
The ADR CRU Producer PRO HIGHSPEED is a standalone CRU duplicator for the cinema industry.
The CRU standard is used in many digital cinema servers all around the globe.
This CRU duplicator was developed based on our long experience with duplicator systems in the market.
Our target was to develop the best CRU duplicator in the market.
It is very easy to use and it comes with an outstanding performance.
Everybody can handle it without a training or installation from a technician.
Just plug you master and targets CRU carriers and push the OK button.
Everything else is done by the CRU duplicator.
The system will copy all Data "bit-by-bit" and it can automatically start the compare process.
Standalone CRU duplicator FPGA based without need of PC.
The system will be controlled with 4 buttons and LCD Display.
ADR1-7HDMTCRU-HS & ADR1-15HDMTCRU-HS will copy your data with up to 18GB/minuter
ADR1-15HDMTCCRU will copy your data with up to 15GB/min (some bandwith is needed for the DC connection)
The special design of cable structure makes the CRU duplicator an easy to service system.
This is important for a long-term cost effective ownership.
Our controller ist designed to handle CRU HDDs with 18TB and even higher capacity.
The steady engineering of our engineers guarantees the highest compatibility to HDDs in the market.
Read-Only master port:
The first port is called master or source port. The master port of the CRU duplicator can never write or erase data.
This way we assure that no master can be erased.
You can connect the system with your PC to get information displayed on your monitor.
The monitoring tool of the CRU duplicator shows you info about the writing/reading speed, total capacity, used function and the progress of each port.
As inventor of the Daisy-Chain Technology we implemented this function into the ADR1-15HDMTCCRU.
You can connect multiple units and controll the from the first controller.
For example if you connect 2 units you can copy from 1 to 30 targets by using the first controller.
(This function only comes with the ADR1-15HDMTCCRU)
Event Log Management:
The system records a lot of information on the CRU duplicator.
It saves operating durations, port copy progressions device models, capacities, serial numbers, PASS or FAIL results.
Furhtermore the CRU duplicator saves writing and reading speeds.
The Log Report files can be exported through the PC Link software easily for report or data backup in your company.
Some users print out the LOG, stamp & sign it and use it as a QC tool in for their clients.
Speed: ADR1-7HDMTCRUHS & ADR1-15HDMTCRUHS - up to 18GB/Min
ADR1-15HDMTCCRU - up to 15GB/Min
Supported Formats: Quick Copy - Fat16/32/64, Win (NTFS), Linux (Ext2/3/4) and Mac (HFS/HFS+/HFSX)
Whole Media - All formats including proprietary formats
GPT, MBR and advanced formats
Supported capacity: Over 18TB+
Supported OS: All
Operation Mode: Standalone FPGA based
Copy modes: Quick Copy, All partitions, whole media & percentage copy
Compare: "bit-by-bit" comparison of targets and the master.
Erase modes: Quick erase, Full erase (NIST800-88), DoD Erase (DoD5220.22-M), 7 pass Erase (DoD5220.22-M(ECE)), Secure Erase (NIST800-88), Enhanced Secure Erase.
Skip bad sectors: You can skip bad sectors and still proceed with copying
Minimum Speed: If you set a minimum speed and a HDD is slower it will be dropped from the system automatically.
HPA Copy Modes: User can choose various JPA replication methods.
Clear HPA at Erase: Clear or Keep HPS settings during sanitization.
Log Function: The CRU duplicator can safe and export a LOG report
The system works with CRU HDDs Carriers only.
Display: LCD Display with 2x20 Backlit Mono color
LEDs: 3 LED indicators at each port. Yellow (power), green (Pass), red (Fail)
Controller: 4 Push buttons (Up, Down, OK , ESC)
Power: Universal power 115-230V AC, 50/60Hz
Temperature: Working 0-60° Storage -20-85°
Humidity: Working 20-80% Storage 5-95%
Certificates: FCC, CE, RoHs, Reach
If you need to copy USB3.1 HDDs as well you are welcome to check out our USB3.1 duplicators here.