About the ADR CRU Producer PRO 

This product is used in the digital cinema industry.
The ADR CRU Producer PRO is a CRU copier that works without the use of a PC.
It works independent from other Operating Systems and you just need to plug in the power.
Once you have our master drive and targets ready you start the copy process by pushing the OK button.
Everything else is done by the CRU copier.

This CRU copier was created based on our inventions in the duplicator business.
We build duplicators for over 25 years and all our experience is used in this CRU copier.
Based on our skills we developed the best standalone CRU copier in the world.

This CRU copier is pretty fast with up to 9GB per minute on each port.
If you want an even faster model you are can choose the ADR CRU Producer PRO HIGHSPEED with up to 18GB/min. 

You do not need a training or an installation from a technician. The CRU copier is easy to install setup.
Plug in the power and your CRU DX115 DC carriers and you are ready to start the production.

Our copy & verify process is done "bit-by-bit". This way you can be 100% sure that you created the perfect duplicates.
A yellow, red and green LED on each port will inform you about the situation on each port of the CRU copier.

Features:

Operation type:
The CRU copier is FPGA based - you do not need a PC.
With the internal controller and display you can operate the system easily.

Performance:
ADR1-7HDMTCRU & ADR1-15HDMTCRU can copy your data with a speed of max. 9GB/minute on each port

Cabling design:
The CRU copier is designed to minimize the service. If you need to change cables or movedock this is going to be easy.
This way you can act fast and make the service by yourself if cables or movedocks need to be change in the CRU copier.

Controller Design:
Our Cru copier is developed to run with CRU HDDs  with 18TB+.
As we give firmware updates for free we make sure the compatibility is granted.

Read-Only master port:
There is no way that you can rrase the master port. We protected the Read-Only port so nobody can erase a HDD by mistake.

Real-Time Monitoring:
With the monitoring tool of the CRU copier you can visualize the progress of your duplication process.
You can see information on the monitor of your PC. This way you can follow the progress of your production

Event Log Management:

The CRU copier system is saving all your Logs automatically.
It shows you many information about capacities, serial numbers, PASS, FAIL and much more.
If you want you can download this report to print it out or safe it in your databank.

Some service companies print the result on paper and add it to the shipment for the clients.

Specifications:

Speed: ADR1-7HDMTCRU & ADR1-15HDMTCRU - max 9GB/Min
            
Supported Formats: Quick Copy - Fat16/32/64, Win (NTFS), Linux (Ext2/3/4) and Mac (HFS/HFS+/HFSX)
                                 Whole Media - All formats including proprietary formats
                                 GPT, MBR and advanced formats
Supported capacity: Over 18TB+
Supported OS: All
Operation Mode: Standalone FPGA based

Functions: 

Copy modes: Quick Copy, All partitions, whole media & percentage copy
Compare: "bit-by-bit" comparison of targets and the master.
Erase modes: Quick erase, Full erase (NIST800-88), DoD Erase (DoD5220.22-M), 7 pass Erase (DoD5220.22-M(ECE)), Secure Erase (NIST800-88), Enhanced Secure Erase.
Skip bad sectors: You can skip bad sectors and still proceed with copying
Minimum Speed: If you set a minimum speed and a HDD is slower it will be dropped from the system automatically.
HPA Copy Modes: User can choose various JPA replication methods.
Clear HPA at Erase: Clear or Keep HPS settings during sanitization.
Log Function: The CRU copier can safe and export a LOG report

The CRU copier works with CRU HDDs Carriers DX115DC only.

Hardware Specifications:

Display: LCD Display with 2x20 Backlit Mono color 
LEDs: 3 LED indicators at each port. Yellow (power), green (Pass), red (Fail)
Controller: 4 Push buttons (Up, Down, OK , ESC)
Power: Universal power 115-230V AC, 50/60Hz
Temperature: Working 0-60° Storage -20-85°
Humidity: Working 20-80% Storage 5-95%
Certificates: FCC, CE, RoHs, Reach

If you need to copy USB3.1 HDDs as well you are welcome to check out our USB3.1 duplicators here.