Pushing tool

Pushing tool

With the pushing tool, it is a cheap and easy way to place boards, circuit boards etc. in an enclosure.

einsatz-des-rippendrueckers-1-k_517-large.gif

Pushing tool PT-Ripp
With the PT-Ripp pushing tool, two 8 mm long lugs are pressed at a distance of 1.7 mm, between which 1.6 mm thick PCBs can be stored. The height of the lugs is more or less dependent on the punching pressure applied. 

rippendruecker_152-large.gif

Below you can see a circuit board that is held by the ribs in a housing wall.

einsatz-des-rippendrueckers-mit-platine-k_517-large.gif

Please do not hesitate to contact us:


ADR Europe /
Headquarter - Germany 

+49-6222-9388-0

or write us via e-mail:
[email protected] 

ADR USA / North America
Toll free

+1 (920) 757 3188 

or write us via e-mail:
[email protected] 

ADR UK /
United Kingdom

+44 (0) 7801884478

or write us via e-mail:
[email protected]   

ADR Ireland 

+353 (1) 231 2805

or write us via e-mail:
[email protected] 

ADR France /
Paris 

+33-173 306092

or write us via e-mail:
[email protected] 

ADR Italia / 
Bologna

+39 051 0393873

or write us via e-mail:
[email protected] 

ADR Australia /
Adelaide

+61 (0) 40 88 11 592

or write us via e-mail:
[email protected] 

ADR Malta

+356 790 51811

or write us via e-mail:
[email protected] 

ADR AG Team Belegschaft