Downholder

Downholder

Downholder are an important addition to the system. They prevent the punched material from “sticking” to the punch and taking the material with it when the punch is pulled out. Then the sheet can only be loosened by bending the punch back and forth. This in turn causes the sheet metal to bend or the punching to expand.

This can be avoided with the downholder.
Downholder are available in the cut-out sizes SN5 5mm cut-out to S32 32mm cut-out width.

In addition to the universal, adjustable wiper, the following wipers are available.

lieferbare-abstreifer-large.jpg
And here are a few examples of the adjustable sheet metal scraper / downholder
niederhalter-verstellbar-mit-vierkantstempel-large.gif  niederhalter-verstellbar-mit-runden-stempel-large.gif niederhalter-verstellbar-auseinander-large.gif

Please do not hesitate to contact us:


ADR Headquarter /
Heidelberg - Germany 

+49-6222-9388-0

or write us via e-mail:
[email protected] 

ADR USA /
Milwaukee - USA
Toll free

+1 (920) 757 3188 

or write us via e-mail:
[email protected] 

ADR UK /
Lincolnshire

+44 (0) 7801884478

or write us via e-mail:
[email protected]   

ADR Ireland 

+353 (1) 231 2805

or write us via e-mail:
[email protected] 

ADR France /
Paris 

+33-173 306092

or write us via e-mail:
[email protected] 

ADR Italia / 
Bologna

+39 051 0393873

or write us via e-mail:
[email protected] 

ADR Australia /
Archerfield

+61 (0) 737 107 001

or write us via e-mail:
[email protected] 

ADR Malta

+356 790 51811

or write us via e-mail:
[email protected] 

ADR AG Team Belegschaft