|
| The
PCIe Producer is a professional copying system for M2 PCIe storage. The
device is used to produce high volumes. The system supports the M-Key
and B + M Key form factors. The unique "MultiTasking Technology" allows
the system to simultaneously copy data to 15 PCIe M2 destinations
simultaneously with a copy speed of up to 18GB per minute. |
We
guarantee a high and stable copy speed regardless of the number of
targets used. The PCIe Producer for M2 Seicher has 4 different copy
modes. These are Quick Copy, all partition copy, percentage copy and
whole copy. Thus, you can choose the right program for your needs that
meets your needs. The Quick Copy Mode only copies the data and skips the
empty areas. The Quick Copy Mode supports NTFS, Linux (ext3 / Ext4),
FAT / FAT32, Mac (HFS, HFSX, HFS +). This copy mode can greatly speed up
the copying process. |
|
In
addition, the PCIe Producer is equipped with various deletion
functions. Quick Erase, Full Erase, DOD Erase, DOD Erase & Compare
functions are available. These different functions can fulfill different
security levels.
|
|
|
 |
Enormous efficiency |
|
| The
ADR PCIe Producer copies your M2 memory at a copy speed of up to 18 GB /
min on all M2 simultaneously without any loss of speed. This PCIe
copier has been specially developed for hardware manufacturers. |
|
 |
|
|
|
|
Whole HDD Copy |
|
Whole Copy also supports unknown formats. In this case, the whole memory is copied bit by bit. |
|
|
|
Systems & Data Copy |
|
| This
copy mode is used for known formats and can greatly reduce copy time.
Windows (FAT16 / 32/64, NTFS), Linux (ext2 / ext3 / ext4), Mac (HFS, HFS
+, HFSX) formats are supported in this mode. Only the area with data is
copied. |
|
 |
|
|
|
|
Supports 4 different delete modes |
|
| The PCIe producer supports 3 different deletion modes |
| 1.Quick Erase: |
Clears the index table and only takes a few seconds |
| 2.Full Erase: |
Deletes the complete PCIe M.2 content |
| 3.DoD Erase: |
Meets the standard of U.S. Pat. Ministry of Defense (DoD 5220.22-M) |
|
 |
|
|
4.DoD Erase&Compare: After the DOD Erase a Compare is performed again
|
|
|
|
High compatibility |
|
| ◎ |
Supports GPT, MBR table format |
| ◎ |
Supports advanced format HDD, up to 18TB |
| ◎ |
Supports OS: Linux, Unix, Windows, Macintosh, etc. |
|
|
 |
|
|
|
|
Open Design |
|
| ◎ |
Supports M.2 (default) |
|
◎ |
Supports optional Mini PCI-E and PCI-E SSD |
|
 |
|
|
 |
|
|
|
|
|
|
|
|
|
Real-time PC monitoring |
|
The
copier can be connected to a computer via USB. During the copying
process, you will see various information about the copying process on
the computer's monitor. You can see information about each port and can
tell early if PCIe storage is malformed. All important information can
be viewed on the monitor of your PC. |
|
IT hard drive duplicator with pc link-right |
|
|
|
|
|
|
|
Log Report |
|
| ◎ |
The
log report stores the duration of the copy process, details on each
port, including the M2 model, capacity, serial number and the result
(pass, fail). |
|
|
| ◎ |
Real-time recording and monitoring via PC connection |
|
 |
|
|
| ◎ |
Log The log report .txt file can also be saved on a USB stick. |
|
|
|
 |
|
|
| ◎ |
The PCIe copier can store up to 130,000 logs, with each LOG representing a single PCIe memory.
(Eg if you are storing a task you have 5 LOG files). |
|
|
|
|
Auto power control system |
|
| When the PCIe copier completes a process, power to the M2 devices is lost. Thus,
it can be ensured that the data carriers are protected and there are no
problems when removing the M2 from the PCIe copier. The individual ports are therefore only supplied with power when an action is taken. |
|
 |
|
|
|
|
Standalone System |
|
| The system can either be operated completely independently of the PC or you can connect the PCIe copier to the PC via USB. The connection to the PC is not necessary and will only be done if you want to use the Monitoring Tool or the LOG Report. |
|
 |
|
|
